Electricity principles

Today , We´re going to learn about the principles of  the electricity.

To start with , we`re going to  watch a video  in which  the basics of electricity are introduced.

Now that we are familiar with those principles we can create a project  about  a simple electrical circuit.

With this Simple Electric Circuit  you will to learn the basics of electricity . You will  build a light circuit powered by a battery and opperated by a switch. You may need the following list of materials or components

Componnents 

• Wooden board
• 1 Light Bulb
• 1 lamp holder
• 1 Battery holder 
• 1 Simple Switch 
• Screws 
• Insulated solid copper wire 

Exemple:

Instructions:

Use the picture bellow to see how you must mount the components on the board

Use  screwdriver to mount the battery holder, the switch and the lamp holder  on the board. 

Loosen the contact screws to make them ready for connecting the wires.Cut 3 pieces of wire and remove the insulation from 1 cm of each end of the wires.  Connect the battery holder to the one of the contacts  on the lamp holder. Take another wire to connect the other contact screw of the lamp holder to one of the contacts on the switch Use the last wire to connect the remaining contact on the switch to the other clip of the battery holder

And that's all folks